Welcome to AmCon Epoxy

AmCon epoxy Paste

AmCon epoxy Kev Coat

AmCon epoxy Underwater Repair Putty

AmCon epoxy Reinforced Repair Putty

AmCon epoxy Pipe Tape white

AmCon Repair Kit

AmCon epoxy Fast Paste

AmCon Hi-Temp 1000°C Putty

AmCon Portable Blaster c/w Turbo Nozzle

AmCon Lab-Metal

AmCon Hi-Temp Lab-Metal

AmCon Lab-Solvent

Amcon epoxy Pipe Tape white - is a patented, fiberglass cloth pre-impregnated with a resin that can be activated by water. Ready to use and does not require any measuring or mixing, with setting time of 30 minutes (75°C). Offering excellent adhesion to steel, SS, PVC, FRP, Clay, Concrete, Rubber, etc.

Amcon epoxy pipe tape is safe to use non-toxic, non-combustible and odorless. This repair cannot only restore a pipe to its original PSI rating, but it can actually make the repair area stronger than the original pipe.

Release water pressure from pipe. Clean and roughen area to be repaired, then
	Joint / Potable water systems: Knead putty until uniform in color. Roll into a rope or ball. Place firmly into joint or crack. Feather edges with wet finger.
	Use gloves enclosed and remove AmCon Pipe Tape from foil pouch. Soak in temperate water for 30 seconds,
	Wrap AmCon Pipe Tape, using entire roll, approx. 2” above and below the repair area. Wrap as tightly as possible
	Squeeze and mold AmCon Pipe in the direction of wrap, removing excess water and spreading resin until tacky to touch (approx. 3-5 min.). Allow 30 min at 75°F before re-applying water pressure.

Physical Properties
Finished Repair Pressure Rating, (8 layers with patch)	600-1000 psi
Temperature Resistance, continuous	300°F (149°C)
Shelf Life	2 years
Tensile Strength, ASTM D 638 Type 1-8 ply	36,448 psi
Flexural Strength, ASTM D 790 Type 1-8 ply	26,100 psi
Compressive Strength, ASTM D 695 -8 ply	8,072 psi
Dielectric Strength (volt / mil)	16,060
Hazards	Non-Toxic, Non-Combustible, and safe to use
Chemical Resistance	Excellent, Refer to product Data Sheet